the thing has arrived

February 2nd, 2008

today marks the beginning of the addiction to the 1973 volkswagen type 181 “thing”
1973 volkswagen type 181 thing

how NOT to install your plumbing

January 20th, 2008

this would be leak #4…

how not to install your plumbing

HV20 35mm SLR Lens Adapter Macro Video Test 1

January 10th, 2008

i shot some macro video test footage around my house this past weekend. the subject is my favorite, tiny insects. my video rig utilizes the highly versatile erector set rubber tire as the adapter between my hv20 and canon slr lens.

i’ll have to shoot stills next time without the 35mm lens attached for reference of scale. the black bug near the end was about a centimeter long and maybe a millimeter wide. it was pretty amazing to be able to focus in on the pits in its head.

maintaining focus was extremely difficult with this rig. because the lens is about 1/4″ away from the subject, grabbing the focus ring blocked much of the light. gently leaning on the tripod back & forth was the best way i could keep focus for many of the shots.

i’m pleased with the results. i’m hoping to find some more interesting shots this weekend to post.

Canon HV20 Erector set tire 35mm SLR lens adapter test macro photos

January 7th, 2008

here’s the original test photos taken with the Canon HV20 and my Erector set tire 35mm SLR lens adapter rig.

this is a multi-colored led
hv20 still macro photo - multicolor led

here’s a single strand of blue Patternayan needlepoint yarn
hv20 still macro photo - single thread of yarn

hv20 still macro photo - 1951 penny

hv20 still macro photo - pencil on paper markings

cheapest Canon HV20 35mm lens adapter ever

January 7th, 2008

One should never be satisfied with the stock lens on a consumer camera. After reading some great websites about adding an SLR lens to the Canon HV20, I rummaged through my closet to find my old Canon Rebel 35mm SLR camera that came with a 28-80mm lens. It appeared that I could find focus with the HV20 if I kept the SLR lens within an inch or so in front of the HV20 and the subject nearly touching the SLR’s glass. Early tests produced macro shots I’ve never dreamed of doing before.

Digging in the closet once again produced an unlikely collar to fit between the two, an Erector set toy tire. The tire (labeled Meccano 11×7) grabs the Canon SLR lens threads tightly and mounts to the HV20 by merely twisting it onto the front of the camera. I’ve found that it leaves the proper gap to allow for focus with an adjustment of the zoom & focus rings on both the HV20 and the SLR lens.

The “true” lens adapter products I’ve seen range from homemade to thousands of dollars. This has got to be one of the cheapest and simplest adapters ever. It’s a pain to maintain focus with, and the tire can slip off the camera and drop the lens (adult supervision only), but it seems to work and produce some not-so-clean, but damn macro, macro video. Video test shots to come.

Canon HV20, Canon 28-80 SLR Lens, Erector Toy Tire

Erector Toy Tire - 11x7

stretch the tire around the SLR lens

lip of tire holds beneath the 3 Canon lens threads

the tire holds tight to the lens

assembled DYI Canon HV20 Macro SLR Lens Rig

congrats to nanosolar!

December 19th, 2007

yesterday marked the first day that Nanosolar began shipping their printed thin-film solar cell. nanosolar is pioneering lower cost solar technology by printing their solar cells from semiconductor ink onto low-cost material, making their very efficient cells one tenth to one fifth the cost per kilowatt of conventional solar technologies. i can’t wait till i can buy these at fry’s!!

canine hip dysplasia

November 24th, 2007

theo has canine hip dysplasia

theo's canine hip dysplasia x-ray

solatube - solar tube skylight installation how-to

November 13th, 2007

at a recent art festival, we came across a booth showcasing solar tube lighting, something i’d been interested in for a while. we signed up for a professional installation of solatube solar lighting by solartex, a local austin dealer. i’d researched solar tube lighting in the past, but found the notion of cutting holes in my roof a bit too daunting for a self-install.

the very friendly solartex installer, aaron, mentioned he could teach me how to install them myself if i was interested. little did he realize i’d then be following him around with my cameras, documenting his every step…he was a great sport and grinned throughout my pestering.

the result is a how-to photo essay of professional solar tube installations:

first, one must choose the appropriate size solar tube for the room. solatubes come in 10 and 14 inch sizes. we decided on a 14 inch solatube for our kitchen / breakfast room area. it gets some natural lighting from north and south windows, but we end up using overhead lights in the morning and early evenings.

here’s the kitchen with natural lighting from north and south facing windows

here's the kitchen with natural lighting from north and south facing windows

ensure you have ample room between joists in the ceiling, then make a center point hole with a drill

ensure you have ample room between joists in the ceiling, then make a center point hole with a drill

draw and cut out a 14 inch circle

draw and cut out a 14 inch circle

eyeballing the center of the circle, use a measuring tape to find a matching center point on the roof

eyeballing the center of the circle, use a measuring tape to find a matching center point on the roof

drill a hole from the attic, then find the hole on the roof. use the dome skirting to trace another circle.

drill a hole from the attic, then find the hole on the roof.  use the dome skirting to trace another circle.

cut circle piece from the roof

cut circle piece from the roof

installer hint — when you get close to completing the cut, grab the piece so it doesn’t fall through your ceiling below!

installer hint -- when you get close to completing the cut, grab the piece so it doesn't fall through your ceiling below!

remove roofing nails around sides & top of hole

remove roofing nails around sides & top of hole

cut shingles to create water channel

cut shingles to create water channel

caulk the underside of the dome housing to ensure a watertight seal. he used two tubes on this one.

caulk the underside of the dome housing to ensure a watertight seal.  he used two tubes on this one.

lift loose shingles and place dome housing under

lift loose shingles and place dome housing under

screw down to roof

screw down to roof

measure distance to ceiling below

measure distance to ceiling below

build reflective tube to length using solatube’s “spectralight infinity” sheets

build reflective tube to length using solatube's spectralight infinity sheets

here’s the solar tube with the protective plastic still in place

here's the solar tube with the protective plastic still in place

once plastic is removed, the tube makes a great fun-house lens

once plastic is removed, the tube makes a great fun-house lens

attach the top section of the tubing

attach the top section of the tubing

insert the tube down the dome skirting & screw into place

insert the tube down the dome skirting & screw into place

just look at that Raybender® 3000 Technology!!!

just look at that Raybender® 3000 Technology!!!

dome’s fresnel lens

dome's fresnel lens

install metal reflector in northwest corner of lens to grab more rays

install metal reflector in northwest corner of lens to grab more rays

attach dome lens to roof mount. that’s it for the roof!

attach dome lens to roof mount.  that's it for the roof!

there is an amazing amount of natural sunlight pouring down the tube

there is an amazing amount of natural sunlight pouring down the tube

slide ceiling mount up and tighten screws into place. reflective-tape the seam with the tubing in the attic.

slide ceiling mount up and tighten screws into place. reflective-tape the seam with the tubing in the attic.

add diffuser plate. the solartex installer gave us two options for it.
one was a flat diffusion. we chose the multi-lens option which looked waaay cooler…

add diffuser plate.  the solartex installer gave us two options for it.

using the exact same camera settings as the first kitchen photo, this photo illustrates a quite significant increase in light!

using the exact same camera settings as the first kitchen photo, this photo illustrates a quite significant increase in light!

with auto settings, here’s the kitchen after installation of Solatube light

with auto settings, here's the kitchen after installation of Solatube light

we’ve been enjoying our solatube natural lighting for weeks now. it’s amazing how much light the tube directs into the room…we still catch ourselves turning around to “hit the switch” on our way out of the room… i would highly recommend the solatube natural lighting skylights to anyone looking to add a bit of “green” lighting to their home.